ISO 9001:2015 · MSME ZED Bronze certified manufacturer · Become a dealer · query@awassindustries.com
On site

Add water.
That’s it.

A ready-to-use premixed powder, so nothing is measured or blended on site. Applicators trowel, spray or roll it depending on the finish.

Step 01

Prepare the wall

The surface must be sound, clean and dry — free of loose particles, dust, grease, oil, curing compounds, efflorescence and laitance, with no shrinkage left in it. Goes over concrete, cement plaster, brick masonry and asbestos cement. Not recommended over lime wash.

Step 02

Mix with water only

Add 4.0 to 6.4 litres of clean drinking water to a full 30 kg bag — 20 to 30 percent — and mix by hand or with a low-speed mechanical mixer to a smooth, lump-free paste. Nothing else goes in, and no extra water.

Step 03

Apply and texture

Trowel, spray or roller, depending on the finish. For trowel work, spread evenly with a stainless steel trowel and dab in one direction to keep the appearance uniform. For spray, build 3 mm layers, letting each set 30 to 60 minutes, at most 2 mm per coat on a vertical surface.

Step 04

Dry and clean up

Leave the surface 24 hours to dry. Do not rework it after the initial set. Clean hands and tools immediately with fresh water — the material contains cement and polymer and sets hard.

Do not apply in high wind, unlit conditions or rain, or below 10°C or above 45°C. Ask us for the datasheet of the grade you’re specifying, and we can guide your applicator through the first wall.

Why it holds

Mineral colour
doesn't fade.

The performance comes from the stone, not the tint. Below is what that buys you over the life of the wall.

UV

Colour that stays

Natural mineral chips carry their own colour, so sun exposure doesn't wash the wall out the way a pigmented film does.

H₂O

Sheds water, still breathes

Water runs off the textured face while vapour from the substrate keeps moving out, so trapped damp doesn't blister the coat.

MPa

Hard face

Quartz and granite grains take knocks, brush cleaning and pressure washing far better than a smooth emulsion.

SEAM

No joints

A continuous surface means nothing to grout, nothing to stain along a line, and nothing to come loose in a sheet.

DUST

Hides what walls collect

Multi-tone speckle breaks up patch marks, hairline movement and street dust that show badly on flat colour.

VOC

Low VOC, safer indoors

A water-mixed, cement-based powder with no added lead and a low VOC load, so the finished wall stays closer to odour-free — it matters in bedrooms, schools and hospital interiors.

LAB

Tested, not just claimed

Grades are checked against NABL-accredited laboratory reports, so the numbers behind a specification can be produced on request rather than asserted.

CARE

Low maintenance

Wash down and go. Fine and granite grades in particular need little more than water to come back up.

Next step

See it in
daylight.

Screens shift colour. Tell us the wall, the area and the finish you are after, and we will send physical sample cards of the closest grades.

Request a sample
Email us